Cerwin Vega Sub-Woofer Crossover HT10D Good to at least 250 watts 4 or 8 ohms
Click on and image to enlarge...
Basic crossover for subwoofer applications, can be used with 6.5 inch to 15 inch woofers.
Takes the input from the left and right stereo channels and routes it to the DVC subwoofer (120 Hz. and Below)
Has Satellite Speaker Outputs, as well.
Rated to 250 watts RMS.
Great DIY for Car Boom Boxes, or a Home Subwoofer Application.
Rated at 8 ohm, it will work with either a Dual Voice Coil Woofer, or Two Single Voice Coil Woofers. To get the full effect, you need to combine both R & L Channels
When used with a 4 ohm driver, the crossover will send all signals from about 200 Hz. down, to the woofers. Which still is OK for a Sub-Woofer
Cerwin Vega Sub-Woofer Crossover HT10D Good to at least 250 watts 4 or 8 ohms
Click on and image to enlarge...
Basic crossover for subwoofer applications, can be used with 6.5 inch to 15 inch woofers.
Takes the input from the left and right stereo channels and routes it to the DVC subwoofer (120 Hz. and Below)
Has Satellite Speaker Outputs, as well.
Rated to 250 watts RMS.
Great DIY for Car Boom Boxes, or a Home Subwoofer Application.
Rated at 8 ohm, it will work with either a Dual Voice Coil Woofer, or Two Single Voice Coil Woofers. To get the full effect, you need to combine both R & L Channels
When used with a 4 ohm driver, the crossover will send all signals from about 200 Hz. down, to the woofers. Which still is OK for a Sub-Woofer
Deutsch
Dansk
Español
Française
Italiano (IT)
Dutch
Norsk
Svenska
